Any plumbing problem should be fixed as soon as possible. However, slab leaks are the most serious. It is important to understand the risks and causes of slab leaks so that you can take the correct actions if this happens. This article will explain how to fix slab leaks.
What are Slab Leaks?
A concrete slab is laid on top of soil or gravel to form the foundation of your house. Most often, water and sewer lines are run beneath the slab. The soil or gravel around them keeps them insulated and helps reduce costs. A slab leak is a leakage in one of these lines below your home’s slab foundation.
Because they can cause structural damage to your home, slab leaks can be a serious problem. If enough water is allowed to leak under the slab, your foundation can shift or sink in the soil saturated areas. Cracking in walls and floors can result, as well damage to walls from shearing forces.
What Causes Sink Leaks?
Concrete slab leaks are rare because they are extremely resistant to temperature and pressure changes. A slab leak is often caused by a specific set of problems. Poor construction and improper installation of pipes are the main causes. Slab leaks are more likely to occur if slab material is of low quality or if the pipes are damaged.
Leakages in your plumbing can also affect the water lines beneath your slab foundation. Slab leaks can be caused by poor pH balance, contaminants or corroding pipes. High water pressure can cause pipes to vibrate against slabs and eventually corrode them.
What are the Signs of Slab Water Leaks?
These are signs that could indicate a slab-related leak in your home. A slab leak can cause an increase in your monthly water bill and reduce your home’s water pressure. This is because a lot of your water is lost beneath the slab. Water may pool around your home’s exterior as the soil becomes saturated, forcing water to the surface.
These signs are a good indicator that there is a slab leak. A professional slab leak detection service is the best way to determine if there is a slab problem beneath your home. This can be done without removing the slab. To detect leakages in concrete slabs, contractors use mics and other acoustic devices.
Repiping: How to Repair Leaks in Slabs?
You can repair slab leaks by removing the foundation and replacing the affected section of pipe. Repiping is a more permanent and cost-effective option. Repiping refers to the disconnection of pipes under the slab and the routing of new pipes through the attic or around the sides.
Because it prevents slab leaks from recurring, repiping is the best method to repair slab leaks. There is no risk of a slab leak damaging your foundation or any other parts of your home because the pipes beneath your slab are not being used. Repiping avoids the need to break through concrete slabs.
These tips will help you quickly and efficiently fix a slab leak in your home. Contact Clog Kings Plumbing Services today if you suspect a slab-leaking pipe.
This post was written by Joey Denick. Joey is the Owner and Operator of Clog Kings. At Clog Kings, LLC, we pride ourselves on our dedication and efficiency. We know you don’t have time to waste. That’s why we work fast to get your home or commercial building back up and running in no time. If you are looking for a Drain Cleaning in Doctor Phillips Florida then look no further because we got you covered!